Tire Curing Press Valves「ROCKY」series
2-way piston valve(SWCseries) PRODUCTS

POINT Socket Weld (SW)

Since this connection method does not use flanges, cost is reduced and there is no leakage from the flange gasket. In addition, the valve body can be insulated in the same way as the piping, and the unit can be replaced without removing the insulation.

POINT Angled Seat

By making the body an angled seat shape, a Cv value equivalent to TPC is realized in a compact body.

POINT Design Based on Proven Traditional Structures

The main parts, such as the packing, have the same structure as the TPC Series, which has a long history of use.

POINT Actuator Unit Flanged to Body

Since the body and actuator unit are separate, welding of the body and piping and airtightness inspections can be performed first. In addition, by using a flange connection, there is no need to use large tools to attach and detach as with screw connections, and there is no risk of screw seizure.

POINT Simple Size Configuration

Each size only has one type, making model selection simple. Like the TPC Series, there is no specified flow direction, and either side can be used as the high pressure side.

Fluid	Steam, N2 gas, hot & cold water
Maximum working Pressure	3.2MPa
Maximum working Temperature	205℃
Operating Air Pressure	0.3〜0.35MPa
End Connection	Pilot air port	Rc 1/4、 NPT 1/4、 G 1/4
	1,2 Port	Socket weld (JIS B 2316)

Appearance	Model Number	Size	Number of Ports/Function
	SWC1215	DN15、 20、 25、 40	2-way, Normally Closed (NC)

	SWC1225	DN15、 20、 25、 40	2-way, Normally Open (NO)

Tire Curing Press Valves「ROCKY」series
2-way piston valve(SWCseries) PRODUCTS

Product Overview

Download Documents

Product Features

POINT Socket Weld (SW)

POINT Angled Seat

POINT Design Based on Proven Traditional Structures

POINT Actuator Unit Flanged to Body

POINT Simple Size Configuration

Main Specifications

Product Lineup